2017 Latest Design Flange Sleeve Anchor - High Strength Bolt – Ji Luo Fastener

Short Description:

High-strength bolt is a high-strength bolt, which belongs to a standard part. Generally speaking, high strength bolts can bear more loads than ordinary bolts of the same specification. The working principle of high-strength bolt connection is intentionally to exert a large pre-tension force on the bolt, which causes the extrusion force between the contact surfaces of the joints, so there is a great friction perpendicular to the direction of the screw, relying on this friction force to transfe...


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for Foundation Bolt Material , Foundation Anchor Bolt , Expansion Bolts , Welcome your enquiry, best service will be provided with full heart.
2017 Latest Design Flange Sleeve Anchor - High Strength Bolt – Ji Luo Fastener Detail:

High-strength bolt is a high-strength bolt, which belongs to a standard part. Generally speaking, high strength bolts can bear more loads than ordinary bolts of the same specification.
The working principle of high-strength bolt connection is intentionally to exert a large pre-tension force on the bolt, which causes the extrusion force between the contact surfaces of the joints, so there is a great friction perpendicular to the direction of the screw, relying on this friction force to transfer the connection shear. The pre-tension force of high-strength bolts is achieved by tightening the nuts. The common high-strength bolts generally adopt the methods of torque and rotation. The Torsion-shear type high strength bolt adopts the Torsion-shear bolt tail to control the pre-tension force.
High strength bolt is made of high quality alloy structural steel of 10.9S or 8.8S grade,and it has been heat treated,and its hole is drilled,which of friction diameter is 1.5-2.0 mm larger than the nominal diameter of the bolt,of pressure connection diameter is larger than the nominal diameter of the bolt 1 ~ 1.5mm.
High strength bolts are mainly used in steel structure engineering. One of the most important characteristics of high strength bolts is that they are limited to single use. They are generally used for permanent connections. It is strictly prohibited to reuse them.
According to the state of force, it can be divided into friction type and pressure type.
In fact, there are differences in design and calculation methods. The ultimate state of bearing capacity of friction type is the sliding between plates,which for pressure type is connection failure. Friction type high strength bolts can not fully develop the potential of bolts. In practical application, friction high strength bolts should be used for very important structures or structures that bears dynamic loads.especially when the reverse stress is caused by loads. At this time, the untapped bolt potential can be used as a safety reserve.In addition, high-strength bolted connections of bearing type should be adopted to reduce the cost.
According to the construction technology, it can be divided into torsional shear high strength bolts and hexagonal high strength bolts.
The big hexagonal high strength bolt belongs to the high strength grade of ordinary bolt, while the torsional shear high strength bolt is the improved type of the big hexagonal high strength bolt, in order to better construction.
The construction of high-strength bolts must first be screwed before final screwing, and the initial screwing of high-strength bolts needs impact type electric wrench or torque adjustable electric wrench; while the final screwing of high-strength bolts has strict requirements, the final screwing of high-strength bolts must use torsional shear type electric wrench, and the final screwing of high-strength bolts must use torsional type electric wrench.
The wire used for high strength bolt is 45 steel and so on. Which has been heat treated on C1035. This hardening treatment method can generally achieve 22-32HRC high strength.


Product detail pictures:

2017 Latest Design Flange Sleeve Anchor -
 High Strength Bolt – Ji Luo Fastener detail pictures

2017 Latest Design Flange Sleeve Anchor -
 High Strength Bolt – Ji Luo Fastener detail pictures

2017 Latest Design Flange Sleeve Anchor -
 High Strength Bolt – Ji Luo Fastener detail pictures


Related Product Guide:
Golf | Black Bolts And Nuts
Mayhew Tools Introduces ProPneumatic Four Piece Flange Nut/Bolt Driver Set | Stainless Steel Material U Type Bolts

As a way to ideal meet up with client's desires, all of our operations are strictly performed in line with our motto "High Top quality, Competitive Cost, Fast Service" for 2017 Latest Design Flange Sleeve Anchor - High Strength Bolt – Ji Luo Fastener, The product will supply to all over the world, such as: United States , UAE , Guatemala , Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we will prove our capability. With your kind help, we believe that we can create a bright future with you together.
  • Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Iris from Algeria - 2016.04.28 15:45
    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Joanna from Czech - 2015.06.09 12:42
    WhatsApp Online Chat !